This Edwardian tiled stone floor was installed in the hallway of a house in Richmond, Surrey. It had not been deep cleaned for a number of years and a number of layers of old sealer were visible causing a yellowing of the tile. The old sealant needed to be stripped off before cleaning could take place and leave the Edwardian floor in a state ready to receive a new seal.
Cleaning Edwardian Tiles
To remove the old sealer a dilution of Tile Doctor Remove and Go which is a solvent based stripper was applied to the floor, left to dwell for a while and then steamed into the tile which helps to break up the old sealers. The tiles were then scrubbed using a rotary machine and a dilution of Tile Doctor Pro-Clean which is a strong alkaline product and the residue pressure rinsed away. The soiled residue was then removed using a wet vacuum and the floor rinsed thoroughly.
Sealing Edwardian Tiles
After leaving the Edwardian floor for 24 hours to dry, we then applied seven coats of Tile Doctor Seal and Go topical sealer. This not only gives the floor a high level of protection but it also enhances the contrast of the tiles and gives a nice shine,
Hopefully you can appreciate the difference from the photographs and how the appearance of the tiles now looks much fresher.